What is OEE and how do you calculate it?
- Author:
- Christos Potamitis
- Published:
- 2 min read
Short answer
OEE (overall equipment effectiveness) measures how much of the planned production time turns into good products at the right speed. It is calculated as availability × performance × quality. An OEE of 100% means the machine ran the whole planned time, at full speed and with no scrap.
The formula
- Availability = actual run time ÷ planned production time
- Performance = (units produced × ideal cycle time) ÷ actual run time
- Quality = good units ÷ units produced
OEE = availability × performance × quality.
A worked example
- Planned time: 480 minutes, one 8-hour shift.
- Stops: 60 minutes, so a run time of 420 minutes.
- Ideal rate: 1 part per minute.
- Produced: 350 parts, of which 330 good.
- Availability: 420 ÷ 480 = 87.5%
- Performance: 350 × 1 ÷ 420 = 83.3%
- Quality: 330 ÷ 350 = 94.3%
- OEE: 87.5% × 83.3% × 94.3% ≈ 68.8%
You get the same answer directly from good parts times ideal cycle time, divided by planned time: 330 × 1 ÷ 480 ≈ 68.8%.
What lowers OEE?
The losses are usually grouped into six, two for each part of the formula:
- Breakdowns and unplanned stops.
- Changeovers and adjustments.
- Minor stops.
- Reduced speed.
- Start-up scrap.
- Scrap during production.
What is a good OEE?
85% is often cited as world class. Many manufacturers are well below that when they start measuring properly, and that is normal. Compare a machine with itself over time rather than with other people's figures.
How to get started
- Start with one machine or line.
- Let the operator report stops and their cause right at the machine.
- Count scrap every shift, not at the end of the month.
- Track OEE weekly and tackle the biggest loss first.
Naexit builds production planning and follow-up systems, with reporting at the machine and OEE calculated automatically. Read more about systems for manufacturers.
Frequently asked questions
- Overall equipment effectiveness, a measure of how effectively a machine or line is used.
- Yes. TAK is the Swedish abbreviation for the same three parts: availability (tillgänglighet), performance (anläggningsutnyttjande) and quality (kvalitetsutbyte).
- Yes, it is fine to start that way for one machine. It gets harder when more machines are tracked and stops and scrap need reporting as they happen, because that means a lot of typing in afterwards.
- Scrap is parts that don't pass and have to be thrown away or reworked. It lowers quality and so lowers OEE.

Got a project in mind?
Tell us briefly what you want to build, and we'll get back to you and take it from there.